| |
| |
| |
 |
|
|
Automatic Tool Changer |
|
|
 |
-
Machine will automatically pick
up tools during tool
changes.
-
Use industry-standard
toolholders and collets, Very
quiet operation.
-
Wide range of spindle power
available.
-
All automatic tool changers come
equipped with Interlock Safety
Board, which monitors spindle
actions.
|
|
Collet Spindles |
ITALY 6KW(8HP) HSD HIGH-FREQUENCY SPINDLE |
-
Maintenance-free
-
Industry standard ER collets
-
Quiet operation
-
6,000 to 18,000 rpm standard
-
Ideal spindle choice for a variety of materials to be cut On/Off functions controlled via CNC
|
|
|
| |
|
|
WATER COOLING 2.2/4.5KW(3/6HP)COMMERCIAL SPINDLE |
-
220V AC operation
-
6,000 to 22,000 rpm
-
Heavy-duty aluminum mounting bracket
-
On/Off functions controlled via CNC
|
|
| |
|
4TH AXIS |
 |
|
|
I |
|
IEHK CNC Routers are all 4-axis ready. Whether you
need to route an intricate 3D carving on a cylindrical surface or index a part by rotating it a set number of degrees, the 4th axis upgrade will prove to be a valuable tool. A single machine can be equipped with up to six router spindles and six rotary stations, thus increasing the production by six times. |
|
|
Vacuum Table |
|
|
|
Grid pattern offers maximum
flexibility and
provides easy customization of table surface.
|
|
With vacuum
hold down table, allow for both mechanical and vacuum fixturing to be used simultaneously.
If you are processing sheets of material such as MDF,
Melamine, plastic, foam or
any other sheet-like material, vacuum flow-through process is an excellent solution. If you are processing small or irregular shaped products, then you may want to utilize vacuum along with mechanical clamps. With IEHK’s universal vacuum table, you can achieve both. With the T-Slots built into the vacuum table, it is easy to mount gates for banking your material against, lining the material up square to the axis of travel. In addition, IEHK vacuum tables are zoned. If you are processing small parts, then you do not
require the entire machine’s vacuum table to be wide open, rather, just a small section.
|
|
|
Mist Coolant System |
 |
|
SPECIFICATIONS |
|
Inlet Pressure Range |
60-125 PSI |
|
Air Consumption |
0.3 cubic ft/min @ 90 PSI |
|
Reservoir Capacity |
1000ml |
|
|
|
This coolant system is ideal for all
IEHK cnc router equipped without a vacuum table. This misting unit provides a steady stream of mist lubricant that immediately cools and lubricates the cutting
metal. |
|
|
Dust
Collection System |
 |
FEATURES |
-
1.5HP
AC motor
-
Quiet operation
-
Unit on wheels for easy mobility
-
1300 CFM air flow
|
| |
|
| |
|
Motion controller
Card |
|
|
 |
PCI bus interface
- Improved motion algorithm with better machining quality
- Higher pulse output frequency
- Differential output/input signals with better reliability
- Extended boards with simpler wire connection
|
| Servo Driver Interface |
| Look ahead |
Yes, intelligent |
| Maximum file size |
Up to 2G byte |
| Feedrate override |
0 – 120% |
| Spindle override |
50 – 150% |
| Simulation |
Yes |
| Operation mode |
Auto/Jog/Inc/Mdi/Bkref |
| Auto centre |
Yes |
| Compensations |
Backlash/Leadscrew/ Quadrant |
|
| Additional Software Packages |
| Laser package |
Optional |
| Water-jet package |
Optional |
|
| Others |
| Power supply |
24v DC for external I/O |
| Tool measuring |
Yes |
|
| Axis |
| Number of axis |
3 |
| Rotary axis |
Yes(Alternated with Y) |
|
|
| Servo Driver Interface |
| Position signal |
Pulse/direction |
| Signal type |
Differential |
| Pulse frequency |
160KHz |
| Number of spindle |
1 |
| Spindle speed signal |
Analogue (0 – 10v) |
|
| Extended Board(may vary wtih type of extended board) |
| Alarm lamp relay |
Red/Green Lamps |
| Lube relay |
Yes |
| Coolant relay |
Yes |
| External cycle buttons |
Start/Stop |
|
|
| File Formats |
| G code |
Yes |
| PLT format |
Yes, 2D and 3D |
| DXF format |
Yes |
| ENG format |
Yes, up to v5.19 |
|
| © Copyright 2009-2012 IEHK LASER AND CNC Systems CO. LTD. All rights reserved. |
